Cristofer Deschamps
Sedley
Summary
Effective at maintaining two- and four-stroke engines and associated electrical components. Diligent and safety-focused with top strengths in problem-solving and communication.
Overview
8
8
years of professional experience
Work History
Small Engine Mechanic
Walkers small engine and equipment
Ivor
07.2023 - Current
- Repaired and replaced faulty engine components promptly.
- Diagnosed issues in small engines and equipment effectively.
- Performed diagnostics and repairs on a variety of small engines, including lawn mowers, snow blowers, chainsaws and leaf blowers.
- Conducted regular maintenance on various small engine models.
- Performed regular preventative maintenance tasks such as oil changes and filter replacements.
- Utilized diagnostic tools to assess equipment performance accurately.
- Inspected parts for wear and damage using precision instruments.
- Disassembled engines to gain access to defective parts for removal or repair.
- Replaced faulty or worn out components such as fuel lines, carburetors, pistons, rings, gaskets and spark plugs.
- Adjusted engine speed and timing according to manufacturer's specifications.
- Installed new engines in place of old ones utilizing appropriate tools.
- Tested repaired equipment to ensure proper performance.
- Collaborated with team members to streamline repair processes.
- Educated customers on proper equipment care and usage practices.
- Educated customers on the proper operation and maintenance of their small engine products.
- Provided customer service by answering questions about maintenance needs for small engines.
- Consulted with customers to understand and meet individual maintenance or repair needs.
- Ordered replacement parts based on diagnostic test results.
- Managed parts inventory, order tracking and repair documentation by keeping detailed and accurate records.
- Maintained a clean and organized workspace for safety compliance.
- Followed safety protocols while performing repair work in the shop or at customer sites.
- Kept tools clean, sharpened, maintained and put away after job tasks to keep shop in good working order.
- Participated in ongoing training sessions to stay up-to-date with industry standards.
- Assisted other mechanics in more complex repairs when necessary.
- Documented work performed on each piece of machinery to back up customer invoices.
- Used personal expertise and established troubleshooting and diagnostic procedures to identify issues and develop repair plans for various equipment.
- Repaired wide variety of small engine machinery by restoring transmissions, carburetors, differentials, fuel pumps, distributors, starters, valves and various systems.
Fence Builder
Cole Fence
Franklin
09.2021 - 07.2023
- Constructed various types of fences using wood, vinyl, and metal materials.
- Installed fence posts and panels, ensuring proper alignment and stability.
- Operated power tools and equipment for cutting, drilling, and securing materials.
- Collaborated with team members to complete projects efficiently and safely.
- Evaluated site conditions to determine appropriate fencing solutions for clients.
- Maintained tools and equipment in good working condition to ensure safety compliance.
- Communicated with customers to understand their needs and preferences effectively.
- Trained new workers on best practices for fence building and safety procedures.
- Inspected existing fences for damage or decay and recommended appropriate repairs or replacements.
- Ensured compliance with local building codes when constructing new fencing structures.
- Tested completed fences for structural integrity before handing over the project to customers.
- Measured property boundaries to determine the number of fence posts needed for each job.
- Removed old fencing material prior to installation of new structures using shovels, crowbars, sledgehammers.
- Researched different types of materials available in order to make informed decisions regarding best products for specific jobs.
- Advocated safe working practices at all times while on the job site.
- Provided advice on proper care of completed fences in order to ensure longevity.
- Conducted regular maintenance on all tools used in building fences, such as lubricating chainsaws or tightening screws.
- Assisted in loading and unloading trucks with supplies needed for each job site.
- Built custom gates from scratch based on customer needs and preferences.
- Performed general clean up duties around the job site upon completion of project.
- Installed wood fence posts, panels, and gates using a variety of tools including post hole diggers, saws, hammers, drills and screwdrivers.
- Attached fencing materials securely with nails and screws following safety guidelines.
- Cut lumber to specified sizes with hand and power saws to build fences according to customer specifications.
- Organized job sites and ensured that all equipment was properly stored after completion of work day.
- Mixed cement and poured concrete footings for fence posts when necessary.
- Completed work in different weather conditions and on diverse ground types.
- Planned and laid out work according to prepared sketches and blueprints.
- Followed safety guidelines for using tools, equipment and heavy machinery to avoid accidents and injury.
- Used measuring and marking equipment to measure and mark site locations or placement of structures or equipment.
- Operated disc grinder to smooth out, weld or grind parts.
- Positioned and clamped work pieces together to assemble jig fixtures.
- Verified vertical alignment of posts, utilizing plumb bobs and spirit levels.
- Created postholes with appropriate equipment, including spades and posthole diggers and backfilled holes with dirt or concrete to secure fencing.
- Loaded fencing materials and tools onto trucks for transport to job site.
- Used spades and augers to dig fence post holes.
- Removed materials and tools and cleaned up job site after project completion.
- Marked and laid out fence lines and pole locations in accordance with work order and project specifications.
- Fastened fence gates into position using appropriate tools.
- Stretch wire and wire mesh between posts.
- Identified and measured fence location to determine optimal locations to meet project requirements.
- Adhered to strict safety protocols to minimize risk of accidents and injuries.
- Mentored new employees, coaching in job tasks and company procedures.
- Built picket fences by nailing pointed slats to rails.
- Attached rails and tension wire along bottoms of posts to form fencing frames.
Automotive Technician
Courtland automotive service
Courtland
11.2019 - 09.2021
- Diagnosed vehicle issues using diagnostic tools and equipment.
- Repaired and replaced faulty components in vehicles efficiently.
- Repaired vehicles according to manufacturer specifications by replacing worn parts such as brakes, wheel bearings, and spark plugs.
- Performed routine maintenance on various makes and models.
- Performed routine maintenance including oil changes, tire rotations, and brake pad replacements.
- Performed minor maintenance services, including gasket replacements, coolant flushes and tune-ups.
- Conducted safety inspections to ensure compliance with regulations.
- Tested automotive systems such as brakes, steering, suspension, transmission and engine performance.
- Utilized scan tools to diagnose drivability concerns on gasoline powered cars and trucks.
- Inspected vehicle engines and other components to identify potential issues.
- Performed drive ability tests on vehicles after repairs were completed.
- Replaced defective parts with new or reconditioned parts following manufacturers' instructions.
- Advised customers on service needs and potential repairs.
- Displayed excellent customer service skills when interacting with customers regarding their automotive needs.
- Maintained a clean and organized work environment at all times.
- Maintained a clean working environment at all times.
- Operated a variety of shop equipment safely and efficiently.
- Attended technical training courses when available to increase knowledge base.
- Completed repairs and maintenance to major vehicle models to meet safety specifications.
- Removed, replaced, balanced and rotated new or used tires to maintain on-road safety
- Developed in-depth understanding of automotive systems and components to complete fast and accurate repairs.
- Repaired engines and transmissions, providing labor and parts cost breakdowns for work performed.
Cabinet Maker
Creative cabinets
Chesapeake
05.2018 - 11.2019
- Make and finish cabinets
- Make and finish table and counter tops
- Install cabinets and counter tops in commercial businesses
- Built custom cabinets from raw materials based on customer specifications.
- Assembled cabinet components with attention to detail and quality.
- Interpreted blueprints to ensure accurate project specifications.
- Measured and cut wood pieces to exact dimensions required for each project.
- Installed hinges and drawer slides on cabinetry.
- Finished cabinets by sanding, staining and installing.
- Fabricated cabinet frames using a variety of woodworking tools, including saws, routers, and jointers.
- Drilled pocket holes to ensure secure joints for cabinets.
- Operated sanders and laminating machines to adhere wood laminate to surfaces.
- Assisted in installing cabinets at client locations with care.
- Communicated with team members to streamline production processes.
- Maintained a clean and organized workspace for safety and efficiency.
- Assisted other members of the team with various tasks as needed.
- Kept work area clean throughout the day while adhering to safety protocols.
Education
Valley Pathways School
Palmer, AKSkills
- Engine repair
- Engine diagnostics
- Engine overhaul
- Engine rebuilding
- Four-stroke engine repair
- Two-stroke engine repair
- Ignition system troubleshooting
- Fuel system maintenance
- Carburetor repair
- Brake system service
- Suspension system repair
- Transmission repair
- Diagnostic troubleshooting
- Motor overhaul
- Equipment maintenance
- Equipment repair skills
- Equipment inspection
- Equipment assembly
- Equipment calibration
- Parts management
- Parts replacement
- Preventive maintenance
- Preventive Maintenance
- Work order documentation
- Quality assurance
- Compliance knowledge
- Safety compliance
- Shop safety procedures
- Time management
- Delivery schedules
- Project planning
- Attention to detail
- Effective communication
- Team collaboration
- Multitasking capacity
- Task prioritization
- Mechanical aptitude
- Problem-solving
- Adaptability
- Customer service
- Power tool operation
- Hand tool proficiency
- Power tools usage
- Machine assembly
- Motor overhaul
- Engine testing
- Vehicle inspection
- Engine testing
- Equipment calibration
- Parts replacement
- Repair documentation
- Power tools usage
Timeline
Small Engine Mechanic
Walkers small engine and equipment
07.2023 - Current
Fence Builder
Cole Fence
09.2021 - 07.2023
Automotive Technician
Courtland automotive service
11.2019 - 09.2021
Cabinet Maker
Creative cabinets
05.2018 - 11.2019
Valley Pathways School